Starting autotransformers - compact design - Produkte

Starting autotransformers - compact design

Starting autotransformers are used primarily in high power drive systems where the switching of the star connection in the triangle connection of stator windings is technically difficult and does not provide tangible results. In the case of start-up transformers the voltage can be arbitrarily lowered at the time of starting the motor, so that the current drawn from the network does not exceed the set value. If necessary, we can produce starting autotransformers with many tappings. "Compact" design of these autotransformers has a built-in circuit breaker and control system. Configuration of control system is determined individually for specific applications

Produkt für:

Maritime Industrie

Detaillierte Informationen:

Design	Three-phase starting autotransformers EA3R COMPACT are produced in accordance with requirement of standard: EN/IEC 60726
Insulation class	F(155^oC) - standard
Climatic class/Environmental class	C1/E0 - land design; C2/E1 - maritime design
Ambient temperature	40^oC
Protection degree	IP 23
Protection class	I
Frequency	50/60 Hz
Primary voltage	up to 1000 V
Secondary voltage	up to 1000 V
Fastening	by means of angles

Technische Skizze

Dimensionstabelle

Technical data of three-phase starting autotransformers type EA3R COMPACT (samples)

Type of transformer	Core power factor / Outgoing power [kVA]	Sample data	L [mm]	B [mm]	H [mm]	d [mm]	e [mm]	f [mm]	Weight [kg]
EA3RM	114/256	440/244-277-298 III 60 Hz	1310	830	1700	760	765	17 x 27	858
EA3RM	89,0/158	440/215-187-163 III 60 Hz	1044	796	1442	590	735	17 x 27	565
EA3RM	70,0/168	440/285-255 III 60 Hz	1046	799	1441	590	735	17 x 27	542
EA3RM	60,0/113	440/225-215-206 III 60 Hz	1087	792	1410	490	730	17 x 27	484
EA3RM	44,0/84,0	440/230-215-200 III 60 Hz	836	765	1300	430	695	17 x 27	359