Glättungsdrossel 100 Hz ED1W
Smoothing chokes ED1W (100Hz) are usually applied in output circuits of rectifiers. They allow a significant reduction of pulsation of rectified output current. In practice, smoothing chokes are often combined with capacitors and form LC filters.
The following table lists only the sample parameters of some manufactured chokes. After the previous agreement there is a possibility to design chokes with parameters other than those given in the table.
Produkt für:
- Eisenbahnindustrie
- Schwerindustrie
- Leistungselektronik
- Qualität der Elektrizität
- Erneuerbare Energiequellen
Detaillierte Informationen:
| Design | Chokes are produced in accordance with standards: EN/IEC 60076-6; EN/IEC 61558-2-20 |
|---|---|
| Insulation class |
F(155oC) - standard |
| Climatic class / Environmental class |
C1/E0 - land design, C2/E1 - maritime design |
| Ambient temperature | 40oC |
| Protection degree | IP 00 |
| Pulsation content | <= 50% - standard |
| Pulsation frequenccy | 100 Hz |
| Rated voltage | up to 750 V (230V standard) |
| Overload | 110% In |
| Terminals | screw terminal blocks or cable lugs or copper bus bars |
| Fastening | by means of angles |
Technische Skizze
 |
| Standard design |
Dimensionstabelle
Technical data of sample designs of smoothing chokes 100Hz
| Item | Type of choke | Inductance [mH] |
Current [A] |
L [mm] |
B [mm] |
H [mm] |
d [mm] |
e [mm] |
f [mm] |
Weigh [kg] |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | ED1W-12/10 | 12 | 10 | 105 | 84 | 114 | 84 | 62 | 6 x 11 | 3,2 |
| 2 | ED1W-15/25 | 15 | 25 | 174 | 210 | 150 | 135 | 136 | 7 x 13 | 20 |
| 3 | ED1W-1,5/45 | 1,5 | 45 | 135 | 165 | 114 | 84 | 96 | 6 x 11 | 9 |
| 4 | ED1W-0,5/100 | 0,5 | 100 | 150 | 180 | 145 | 122 | 104 | 7 x 13 | 13 |
| 5 | ED1W-0,25/200 | 0,25 | 200 | 174 | 190 | 152 | 135 | 116 | 7 x 13 | 16 |
Note:
Manufacturer reserves the right to make changes resulting from the continuous development of products offered.
If requested in advance, it is possible to manufacture a choke in other version.
For designs with climatic/environmental class C2/E1 the letter "M" ought to be added
for horizontal mounting IP23
for vertical mounting IP23
wall mounted IP23
vertical design IP44
vertical design IP54
for horizontal mounting IP23
