Gleichstrom-Koppeldrossel ED2l

Interface chokes (transition coils) ED2I (300Hz) are usually applied in multiphase systems to couple parallel operating rectifiers.
The following table lists only the sample parameters of some manufactured chokes. After the previous agreement there is a possibility to design chokes with parameters other than those given in the table.

Produkt für:

Detaillierte Informationen:

Design	Chokes are produced in accordance with standard: EN/IEC 60076-6
Insulation class	F(155^oC) - standard
Climativ class / Environmental class	C1/E0 - land design; C2/E1 - maritime design
Ambient temperature	40^oC
Protection degree	IP 00
Pulsation content	<= 10% - standard
Pulsation frequency	300 Hz
Rated voltage	up to 750 V (230 V standard)
Overload	110% I_n
Terminals	screw terminal blocks or cable lugs or copper bus bars
Fastening	by means of angles

Technische Skizze

Exemplary design

Dimensionstabelle

Technical data of sample DC interface chokes ED2I

Type of choke	Inductance [mH]	Current [A]	L [mm]	B [mm]	H [mm]	d [mm]	e [mm]	f [mm]	Weight [kg]
ED2I	2 x 0,024	2 x 135	120	131	159	110	57	8 x 12	5,1
ED2I	2 x 0,13	2 x 130	160	185	208	110	122	8 x 12	16
ED2I	2 x 0,049	2 x 250	200	225	270	140	145	11 x 15	29
ED2I	2 x 0,016	2 x 518	280	266	425	240	181	11 x 15	69
ED2I	2 x 0,9	2 x 700	500	505	717	400	300	13 x 18	360