Fünf-Säulen-Transformator
In many projects there is a need to adjust the dimensions of the transformer to the existing chamber of the machine. Construction of five-leg core reduces the height of the transformer. In the five-leg core there are two extra columns which connect the lower and upper yoke. The use of such a core in a three-phase transformer enable to reduce the cross section of yoke while the transformers power transformer and and column dimensions are unchanged.
Produkt für:
Detaillierte Informationen:
| Design | Transformers are produced in accordance with requirements of standards: EN/IEC 60726; EN/IEC 60076 |
|---|---|
| Insulation class |
F(155oC) or H(180°C) |
| Climatic class/ environmental class |
C1/E0 - land design; C2/E1 - maritime design |
| Ambient temperature | 40oC |
| Protection degree | IP 00 |
| Protection class | I |
| Frequency | 50/60 Hz |
| Primary voltage | up to 1000 V |
| Secondary voltage | up to 1000 V |
| Terminals | screw terminal blocks, cable lugs or copper bus bars |
| Fastening | by means of angles |
Technische Skizze
 |
 |
| Standard design | |
Dimensionstabelle
Technical data of three-phase transformers with five-leg cores are to be agreed before placing an order
Configuration of the housing determined according to individual customer needs. Please contact our sales department or fill out our inquiry form.
